Hi,
I've got a 2004 Corsa mk2.
I was travelling to work this morning and after getting up to around 60-70mph the check engine light...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
178 results in 0.0080 seconds.
Keywords
Members
Tags
-
Corsa Mk2 2004 - error codes P0340, P0300, P0301, P0303
-
Throttle sensor fault.
Hope someone can help.
My 2012 petrol corsa keeps going into limp mode. I was told it was a throttle sensor fault. I have had the pedal unit replaced...
-
APP senor & TP Sensor Outputs
Does anyone know the correct output voltages when idle and at full load for the APP senors and the TP sensors?
I keep getting issues with...
-
Flucuating tempertures.
Lots of posts on this subject, for those who are not aware,
there is a second coolant temperature sensor on the thermastat housing this is linked...
-
Engine Overheating
To all the knowledgeable Vauxhall owners, help needed please with a overheating problem we have with my sons 2011 reg 1.2 petrol corsa D which is ove...
-
Rough idle but good compression while engine running
Hi all.
Just came back from a failed MOT with my Corsa C 1.2 Z12XE and the mechanic told me I could have a bent valve. Idle is rough as mentioned...Last edited by 2jzCorsa; 11-01-2018, 04:57 PM.
-
Help with MAF issue
Have search long time now for wiring diagram to my Corsa C with X18xe1 engine but have failed. I need to know the colour of cables to MAF-sensor, wich...Last edited by Jocke.cc; 05-10-2017, 03:38 PM.
-
Newbie
Hi guys, I was after some information please. Daughter's car Corsa 1.4 SXi auto petrol 2013, where are the following located: a) EGR valve, b) MAF sensor,...
-
-
2008 Corsa D 1.3 - ECM issue.
Hey fellas, could do with a little help.
I went to a friends house to recode the ECM on a 2008 Corsa D 1.3 90bhp - Z13DTH model.
...
-
p2002 limp mode
Hello i have a corsa d 1.3cdti 55kw 2008
154 000klm
i have this code p2002 for 6 months it comes and goes
my readings on scanmyopel
-
Timing Mark Question
Hi All, apologies if this going over old ground, but it's new for me and would appreciate any guidance.
I've bought a gasket/time chain replacement...