Announcement

Collapse
No announcement yet.

Gsi fog lights

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • [Corsa B] Gsi fog lights

    Just two questions,

    What bulbs does the fog light take?

    And where would i get a loom or a wiring diagram to make my own?

    Thanks

  • #2
    They take h3 bulbs.

    You can either rip out the front loom and *******ise it from an actual GAO, or you can use sidelight connectors (same fitting into back of fog light) and make your own loom up.

    There are diagrams out there too tho. Think I even did one a few years ago.
    |> Spec2 R33 Skyline GTS-T <|

    Comment


    • #3
      Ok thanks

      Where do i earth the light off as in here

      Is it solder it anywhere or should it connect to somthing

      Comment


      • #4
        I dont have any pics of mine, but on the plastic cap that seals off the back of the light, you should have two tabs, the fog light itself should have a ground lead coming from where the bulb clips into it. You connect the ground, and the bulbs live to the back of the plastic cap. Then screw the cap on, then plug a sidelight connector into the front of the cap and wire into it that way.
        |> Spec2 R33 Skyline GTS-T <|

        Comment


        • #5
          Originally posted by Dave View Post
          I dont have any pics of mine, but on the plastic cap that seals off the back of the light, you should have two tabs, the fog light itself should have a ground lead coming from where the bulb clips into it. You connect the ground, and the bulbs live to the back of the plastic cap. Then screw the cap on, then plug a sidelight connector into the front of the cap and wire into it that way.
          Thanks again seen it as soon as looked again felt like a prick for not seeing it lol

          Comment

          Working...
          X