No announcement yet.

2008 Corsa D 1.3 - ECM issue.

  • Filter
  • Time
  • Show
Clear All
new posts

  • [Corsa D 2006-2014] 2008 Corsa D 1.3 - ECM issue.

    Hey fellas, could do with a little help.

    I went to a friends house to recode the ECM on a 2008 Corsa D 1.3 90bhp - Z13DTH model.

    The previous ECM had been water damaged, the ECM they had sourced for me to fit was a Z13DTJ one. I installed it an recoded everything under the Z13DTH program type, coding was accepted, car now cranks but won't fire...but diesel is reaching the high pressure pump. The car had been sat for 6 months.

    Car is now giving the following error codes:

    P0090-06 Rail Pressure Control Valve Voltage Low
    P0190-05 Rail Pressure Sensor High Voltage
    P1120-08 Accelerator Pedal Position Sensor 1 and 2 Signal

    Should the Z13DTJ ECU be compatible with the Z13DTH engine? Or is this an airlock in the Diesel system?