Announcement

Collapse
No announcement yet.

Corsa D 2007 1.2i 16v with car spanner issues

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • [Corsa D] Corsa D 2007 1.2i 16v with car spanner issues

    Hi folks, I need some help before I pull the last of my hair out.
    I have the spanner light coming on about 30 seconds after the engine starts. I have tried to read the fault codes with an ODB scanner, which tells me there are no codes stored. However I pressed the brake and accelerator to read the codes and the engine light (not the car spanner) flashed the code for the manifold pressure sensor, which I changed and it made no difference to the spanner light.
    Hence I am here before I reach for the petrol and matches.

  • #2
    Hi welcome to the forum. You need to get it scanned proprely . Someone with op-com would be best . What sensor did you change? Was it the MAP sensor a small plastic sensor held on to the inlet manifold.

    Comment


    • #3
      Hi, it was the MAP sensor, and I thought I might need to use a op-com reader.

      Comment


      • #4
        Yep op-com is the diagnosis vauxhall tool. It go's deeper into the ECU .

        Comment


        • #5
          Many thanks, Iíll let you know how I get on.

          Comment


          • #6
            No.probs. where abouts are you?

            Comment


            • #7
              I live in Ammanford, near Swansea

              Comment


              • #8
                Ok a bit too far from Bristol.

                Comment

                Working...
                X